Rent a Motorcycle

Traveling and commuting can really be annoying especially if time is of the essence. Imagine having only less than a week to visit and see all the things you want. It is really annoying when you have to think about the traffic. So if you need to go to your destination as fast as possible, why not rent a motorcycle?

Renting a motorcycle is a fun and easy way to reach your travel destination. Imagine having to sit for hours riding a car, van, or bus in a traffic-congested street or highway. With a motorcycle you can drive easily even on some busy streets or traffic-congested highway. You never have to miss an important work meeting or miss getting to the local museums, art galleries or theater on time!

When you plan your much-awaited vacation, either together with your life-partner or two of your closest friend, it is better that you already have a mode of transportation in mind. If you plan to go to a beautiful resort or just roam around the cities of Paris, Barcelona, ​​Singapore, Thailand, or any place that you would like to visit, make sure that you have already included a vehicle service to take you to your desired Scenic spots. If you know how to drive a motorcycle, go ahead and rent a motorcycle. But, remember that choosing this mode of transportation is ideal if you are traveling with your wife, girlfriend, or a close friend. It is convenient, cheap, and great if you love to travel light.

Overseas Manufacturing and Clearing Goods Through Customs

When importing into a country, there are a number of terms, regulations and procedures an importer should be familiar with. The following is a guide of different issues to be aware of when importing.

For first time importers, it is highly advisable to pay a customs broker to enter and clear goods through customs. Customs brokers are licensed by the countries in which they operate, and they act on behalf of the importer to file the necessary documents for products to enter a country at the port-of-entry. Depending on their relationship with their client, they may also pay customs duties and other importing expenses on their client's behalf. Finally, they advise importers about issues of which they may need to be aware such as country or origin marks and other issues importers need to be aware of.

When choosing a customs broker, the importer should first make sure they can enter goods at the arrival port. In the US, customs brokers are licensed by the US Customs and Border Protection Service.

Prior to placing an order with a manufacturer, the relevant nation's customs agency and the importer's customs broker should be consulted to avoid possible problems such as the following:

  • Any legal issues that may exist with the product in the country of import.
  • Finding out after the product arrives at port that the it is subject to import quotas.
  • Possible health, safety or other regulations which apply to the product to be imported.

One easy to avoid, but common problem encountered when importing is the failure to mark the product in compliance with country of origin regulations. To avoid this, contact the relevant customs agency of the nation where the merchandise will be imported to ensure the goods are in compliance. For example, custom laws in the US require each imported good be marked with the English name of the country of origin (eg China) as reasonably, indelibly, and permanently as the nature of the article permits. Furthermore, this marking must be visible to the ultimate purchaser of the product.

The tariff rate levied by customs must be paid before the importer can take possession of the goods. While tariff rates in countries like the US average around 5% for most products, they can be significantly higher for some goods, particularly those with higher labor content. Therefore, it is important to know the rate before product arrives at port.

Before the goods are shipped, ensure the packing regulations for the destination country have been adhered. For example, every box, bale or case may need to be numbered with the exact quantity in each.

Other regulations include the type of pallets that can be used.

Problems with customs clearance often center around paperwork. Different goods often require different types of documentation, but the three major types of documentation the shipper must prepare include the following:

1. A bill of lading: This document, issued by the carrier or shipper, is basically a receipt of the goods acknowledging that they have been received on the vessel for shipment. This document indicates the particular vessel on which the goods have been placed, the destination of the goods, and the terms for transporting the goods to their final destination.

2. A commercial invoice: This is used as a customs declaration by the entity that is exporting an item across international borders. This document is required by customs to determine the value of the goods to assess duties and taxes, and goods must be invoiced in a systematic manner.

3. Packing list: This document is an itemized detail of the merchandise in a particular shipment. A copy is usually attached to the outside of the shipping container or inside the container itself so the merchandise may be counted by the person opening it.

It is crucial to make sure these documents, and any others that may be needed for a particular shipment, are carefully completed and reviewed before the goods arrive.

To avoid excess storage fees, arrange for a freight forwarder or some other type of transporter to ship the goods to their final destination as soon as they have cleared customs.

Being aware of these points, as well working closely with customs and a customs broker, will make the importing process smoother and will reduce the possibility of unnecessary difficulty or expense.

What Can You Do When Your Mind Refuses To Write Your Sales Letter?

You need to write a sales letter but you can not find the words, the harder you try the less comes to mind. In the end you're left miserably staring at a blank piece of paper – What can you do?

Many people have told me that they face this kind of problem when it comes to writing their sales letter. No matter how hard they try and think about writing their letter they just can not seem to get things moving.

It's really frustrating and can happen to us all from time to time but there's a great way to get those ideas flowing and break out from the mental blocks. Let me ask you something first though …

Do you know your product?

I mean really know your product.

You see in order to be able to sell something you really have to know it in intimate detail. For instance how can you sell the benefits of Liposuction without you are a woman who's actually been through the process?

What do you know about it apart from heresay? You do not know whether there's any pain involved or whether there's a special diet you need to eat afterwards.

Do you know what feeling there is immediately after the operation? Do you look into the mirror and see the hour glass figure you were dreaming about before you went for the op, if not how do you feel deep down?

Are there feelings of anger and dismay or is there a deep sense of ecstasy as you look out and see the real you that was hiding inside that tired old body all the time?

Only someone who has really experienced those first fearful glances can honestly tell this with an emotion that rings true.

This is why you have to know every little thing that you can about your product before you sit down and try to write your sales letter.

Knowing and loving your product gives you the burning passion to tell all the world about it and is the first step in overcoming the dreaded blank screen that so many sit in front of for hours on end, unfortunately trying to write their sales letter.

So the first thing you need to do is to get hold of your product and fall in love with it – that means you actually have to go and buy, borrow or test drive it.

Look, you're going to be writing a story form your heart telling me exactly why I should buy your product from you. If you do not know and love it how can you in all truth and honesty tell me to buy it?

Ok, go and get your product, take it in your hands and start to use it. If it's a book read it, if it's a car drive it – Do whatever you have to do to get to know your product in the most minute detail.

Next list the reasons why it'll help me in my life – Will it help me make more money or will it help me get from A – B more quickly and in greater comfort?

How heavy is it? Is it easy to use? Does it have any weaknesses?

List everything down the good and the bad.

You need to understand why and how I will benefit from it, also why I should buy it from you instead of from somebody else.

An easy way to do this is by brainstorming.

The way you do this is to take a blank piece of paper and draw a small cicle in the middle, write your product's name in the middle of the circle.

Now it's time for you to get the magic going!

Look at the name of your product and write the very first thing that comes into your mind down on the paper.

Draw a line radiating out from the circle and write your thought at the end of that line.

Do not think or worry about spellling, just write. As Soon as you've finished writing one thought another will be there, draw another line and write that thought down also.

Soon you'll have so many thoughts hitting you that you will not be able to keep up – Just keep on going until you have nothing left inside your head.

This is such a stimulating exercise that it'll often leave you panting for breath!

Once you've finished all you need to do is look at what you've written and make a list of all the great ideas you have. List them in order of importance.

Now you have the outline for your letter.

Use the most important reason on the list, the main reason why I should buy your product (this is the largest benefit of your product) and turn this into a sensational headline.

Allow the ideas on the list to flow into your sales letter using sub-headlines when you need to emphasize a point, soon your letter will have almost written itself.

Finally, when you write your letter remember to only write it to one person at a time – make it personal!

That's it for now, go and grab your product, fall in love with it and start to list the reasons why I should buy it.

Go on do it Now!

Copyright 2006 Stuart Elliott

Diamond Earrings and Other Fine Jewelry

Diamond rings are the most common form of diamond jewelry, but diamond earrings, bracelets and necklaces are also quite popular. In fact, diamond jewelry has been around since the days of the Roman Empire, although it took almost 1500 years before diamond jewelers had figured out how to cut diamonds into attractive shapes that displayed their "fire," or shine and brilliance. Diamond earrings are but one way that people adorn themselves with this mystical, precious gem.

A Fascinating History

Chances are that the first diamond jewelry was from India. The tremendous geologic forces required to form diamonds exists mainly in regions of the world where one tectonic plate slams into another; the Himalayas, where the Indian subcontinent plows into Central Asia, is one such place. Loose diamonds from deep underneath these mountains have been known to appear in the rivers that flow south and westward from the Himalayas: the Ganges, the Brahmaputra and the Irriwaddy have all been sources of these rough, octagonal crystals.

Before diamond jewelers had learned the art of precision cutting, diamond earrings were not particularly beautiful; rough and dull-looking, they were nonetheless prized for their hardness.

One early example of diamond jewelry in the West was actually a crown made for a Hungarian princess well over 1000 years ago. One of the first diamond wedding ring was the one given to Marie of Burgundy on the occasion of her wedding to Archduke Maximilian I of Austria in 1477. It was not until over fifty years later however during the reign of Henry VIII of England that diamond cutting had reached a level that was suitable for jewelry such as diamond earrings.

Dull and Lifeless

If you had been buying diamonds back then, you'd have been disappointed; those early cuts did not show the kind of brilliance that we see in fine diamond jewelry today. It was not until the 1800s that art of diamond cutting had reached a level of refinement that allowed the gem's real beauty to shine through the way it does in contemporary diamond jewelry.

Fiery and Brilliant

Today, there are many different cuts to choose from when buying diamonds . Round cuts and square cuts both have characteristics in their favor, but a reliably new cut, called the "princess," has been gaining in popularity over the past thirty years or so. This particular cut combines the best features of round and square cuts, and causes the least wastage of all cutting methods – so the gem retains much more of its original weight. All three cuts however will make for highly attractive and valuable diamond earrings .